Show: Full Specs/Additional configurations
= = = = = = = = = = = = MB BIOS Release Note = = = = = = = = = = = =
Model: IPMSB-H61
CPU : Intel SandyBridge / IvyBridge
PCH : Intel CougarPoint
SuperIO : ITE IT8728
Flash : SPI 32Mb flash
AFUEFI Version: 2.34_B1
FPT Version : 8.0.4.1441
Flash Method
DOS: (BIOS only) AFUEFI FILENAME /p /b /n (/k)
(ME and BIOS) FPT /f FILENAME
Changes from : IPMSB-Win7-1202-20111221
**Micro Code Information**
For SandyBridge:
M12206A1_00000007 (B-1)
M12206A2_00000026 (B-2)
M12206A3_00000008 (C-0)
M12206A5_00000007 (D-0)
M12206A6_00000028 (D-1)
M12206A7_00000026 (D-2/Q-0)
For IvyBridge:
M12306A0_00000006 (A-0)
M12306A2_00000008 (B-0)
M12306A4_00000007 (C-0)
M12306A5_00000007 (C-1)
M12306A6_00000004 (D-0)
M12306A8_00000010 (E-0/L-0)
M12306A9_00000012 (E-1/L-1)
==================================================================
IPMSB-H61-PEGA-2209-4M.ROM 06/07/2012
MRC Ver(IVB) : 1.5.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2132.
ME Ver : 8.0.4.1441
Checksum : 7B3E.
01. Fix the bug that Can not modify [Primary Graphics Adapter] item value to PCIE VGA First.
==================================================================
IPMSB-H61-PEGA-2208-4M.ROM 06/05/2012
MRC Ver(IVB) : 1.5.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2132.
ME Ver : 8.0.4.1441
Checksum : EC56.
01. Update vbois to 2132.
02. Porting 3VSBSW#: S3-> enable , S0,S1,S4,S5-> Disable.
03. Fix the bug that After setting "all USB Devices" item as disabled, all USB port can use under OS.
04. Change the order of check DLLA following ITE 889x BIOS AP.
==================================================================
IPMSB-H61-PEGA-2207-4M.ROM 05/15/2012
MRC Ver(IVB) : 1.5.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2124.
ME Ver : 8.0.4.1441
Checksum : 5933.
01. Update MicroCode M12306A9 from 306A9_00000010 to 306A9_00000012.
02. Update MicroCode M12206A7 from 206A7_00000025 to 206A7_00000026.
03. Type 02 MB version modify to 1.01A.
04. [PLM-0003]:IPMSB-GS:Fixed the bug that HDD and ODD boot group priority default value should follow USB mass storage class devices->ATA hard drives->Other.
05. Skip USB card reader detect at post phase(Kouziro Card Reader VID = 0x0BDA , DID =0x015x).
06. Update Ivy Bridge System Agent (SA) Framework Reference Code (FRC) Rev 1.5 to fix the bug that on processor graphics systems with certain
configurations, display flicker or black screen may occur during graphics-intensive workloads.
07. Fixed the bug that PCI Express x1 board SK-9E21D LAN card is not be detected in PCIex1 slot.
08. Fix the bug that the system will hang 0xA3 when plug Broadcom PCIEx1 LAN card.
09. Fix the bug that After setting "all USB Devices" item disabled , USBKB cannot be used during POST.
==================================================================
IPMSB-H61-PEGA-2206-4M.ROM 04/12/2012
MRC Ver(IVB) : 1.2.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2124.
ME Ver : 8.0.4.1441
Checksum : 3721.
01. Update Microcode 306A8_0000000C[E-0]/[L-0] to 306A8_00000010.
02. Fix the bug that DMI information show error
01. Change type 0 BIOS version from 4.6.5 to 2206.
02. Add MB version in type 1
03. Add Slot information in type 9
03. Implement HDD and ODD boot group priority default value should follow USB mass storage class devices--> ATA hard drives ---> Other
04. Don't show F1&F2 prompt information on POST screen after clear CMOS.
==================================================================
IPMSB-H61-PEGA-2205-4M.ROM 03/23/2012
MRC Ver(IVB) : 1.2.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2124.
ME Ver : 8.0.4.1441
Checksum : 7CB2.
01. Fix the bug that when enter BIOS with User Password, load default in "View Only" level.
02. Change BIOS ROM Size to 4M and token "NVRAM_SIZE" value to 64k to only support Ivy Bridge.
03. Update ME firmware from 8.0.3.1427 to 8.0.4.1441.
04. Fix the bug that "all USB Devices" item disable has no function.
05. Fix the bug that the Ultra DMA value are different in OS and Post Screen.
==================================================================
IPMSB-H61-PEGA-1204.ROM 03/14/2012
MRC Ver(IVB) : 1.2.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2124.
ME Ver : 8.0.3.1427
Checksum : 90D9.
01. Skip KOUZIRO USB card reader detect at post phase becauce of detecting time too long(VID = 0x0BDA , DID =0x0151).
==================================================================
IPMSB-H61-PEGA-1203.ROM 03/02/2012
MRC Ver(IVB) : 1.2.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2124.
ME Ver : 8.0.3.1427
Checksum : 41E2.
01. Update ME firmware verison from 8.0.1.1399 to 8.0.3.1427.
02. Update MicroCode M12306A9[E-1] from 306A9_0000000C to 306A9_00000010.
==================================================================
IPMSB-H61-PEGA-1202.ROM 02/15/2012
MRC Ver(IVB) : 1.1.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2124.
ME Ver : 8.0.1.1399
Checksum : 81DD.
01. Add MicroCode 306A9_0000000C for Ivy Bridge.
02. Update Microcode 306A8 form 00000008 to 0000000C.
03. Change Port 80 decoding from LPC to PCI.
04. Change ME firmware verison from 8.1.0.1035 to 8.0.1.1399.
05. Change System date display as the format(date:month/day/year) on POST screen.
06. Fix the bug that system will hang 55 after change CPU between Sandy bridge and Ivy Bridge.
07. Fix the bug that when system resume from S3,the BIOSInitTimeMS over 1800MS.
==================================================================
IPMSB-H61-PEGA-1201.ROM 01/13/2012
MRC Ver(IVB) : 1.0.0.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2124.
ME Ver : 8.1.0.1035
Checksum : 81D7
01. Add TPM feature for Generic request.
02. Show correct hotkey information on POST screen,F11 for BBS popup, F12 for PXE.
03. Remove THTF information in SLIC table,implement empty key for generic.
04. Change token "NVRAM_SIZE" value to 128k for Win8 supporting.
05. Support APFN tool to auto load default per factory request.
06. Change copyright from 2011 to 2012 in BIOS setup menu & POST screen.
07. Update Microcode 306A6[D-0] from 00000002 to 00000004
08. Add MicroCode 306A8_00000008[E-0].
09. Fix the bug that Com port can not wake S3/S4/S5.
10. Fix the bug that when set [power on by PS2 KB] disabled, cannot wake up system from S4 through PS2KB.
==================================================================
IPMSB-H61-PEGA-1200.ROM 01/04/2012
MRC Ver(IVB) : 0.8.2.0
MRC Ver(SNB) : 1.2.2.0
VBIOS Ver : 2124.
ME Ver : 8.1.0.1035
Checksum : DA36
Initial BIOS:
01. Change logo.
02. Modify Smbios information좬
Type1
Manufacturer Name to 'PEGATRON'
Product Name to 'IPMSB-H61'
Family String to 'PEGATRON'
Type3
Manufacturer Name to 'PEGATRON'.
03. Change ROMID.
04. Add SLP 2.0 key for GS.
05. Modify H/W monitor function following PEGATRON EFI BIOS Spec_v2.2.
06. Change LED mode following PEGATRON EFI BIOS Spec_v2.2.
S0 - On
S1 - Blink
S3 - Blink
S4 - Off
S5 - Off
07. Modify power management mode following PEGATRON EFI BIOS Spec_v2.2.
08. Change some HotKey items follow PEGATRON EFI BIOS Spec_v2.2.
In Setup Menu:
01.F9 Resets all EFI BIOS Setup options to their optimal default
02.F10 Saves all changes and then exits Setup
03.F7 Discard Changes .
During POST:
01.F12 Boot from Lan ROM
02.F11 Boot Menu.
03.[DEL] Enter Setup Menu.
==================================================================
