The HP Alcor Micro Card Reader Driver provides support for compatible Alcor Micro memory card readers installed in HP notebooks and desktop computers. The driver allows Windows to communicate with the card reader and access supported removable storage media, such as SD and other compatible memory cards. Installing the correct driver can help resolve card reader detection problems and ensure removable storage devices are recognized properly.
Driver Installation
- Download
sp152835.exe. - Right-click the downloaded file and select Run as administrator.
- Follow the HP installation instructions to extract and install the card reader driver.
- Allow the installation to complete.
- Restart Windows if prompted.
- Insert a compatible memory card and check whether it appears in File Explorer.
Troubleshooting
- Memory Card Not Detected: Remove and reinsert the card, making sure it is properly seated in the reader.
- Card Reader Missing: Open Device Manager and check under Memory technology devices or Universal Serial Bus controllers.
- Card Not Appearing in File Explorer: Open Disk Management to check whether Windows detects the card but has not assigned it a drive letter.
- Slow Transfer Speeds: Use a compatible memory card and check that the card reader is operating at its supported transfer speed.
- Installation Problems: Verify that your HP computer uses an Alcor Micro card reader and that this driver package supports your hardware.
Note: This driver is intended for HP systems equipped with compatible Alcor Micro card reader hardware. It will not necessarily work with card readers manufactured by Realtek, Genesys Logic, or other manufacturers.
Compatible Devices:
HP 14 Laptop
HP 15 Laptop
Alcor Micro Card Reader Driver
File: sp152835.exe
bb0bfd953c3abc1db471b35882ac7ee5cf7a4948e19d6f80f9c719c35b427274