(hp) Realtek Card Reader Driver 10.0.22631.31285 REV: C Windows 11

(hp) Realtek Card Reader Driver 10.0.22631.31285 REV: C Windows 11
🧱 Device
🏗️ Manufacturer
Version:
10.0.22631.31285 REV: C
Operating System(s)

The HP Realtek Card Reader Driver enables compatible Realtek memory card readers to communicate with Windows 11. It allows supported HP notebooks and desktop computers to detect and access removable memory cards, such as SD cards, through the built-in card reader.

Driver Installation

  1. Download sp152849.exe and locate it in your Downloads folder.
  2. Right-click the file and select Run as administrator.
  3. Follow the HP installer instructions to install the driver.
  4. Restart your computer if prompted.
  5. Insert a compatible memory card and check File Explorer to confirm it is detected.

Troubleshooting

  • If the card reader is not detected, check Device Manager for errors under Memory technology devices or Universal Serial Bus controllers.
  • Try another memory card to rule out a faulty or unsupported card.
  • If the card appears in Disk Management but not File Explorer, check whether it needs a drive letter assigned.
  • If installation fails, verify that your HP computer uses a compatible Realtek card reader.

Compatibility Note: This driver is intended for HP systems equipped with supported Realtek card reader hardware. It will not replace drivers for card readers made by Alcor Micro, Genesys Logic, or other manufacturers.

Compatible Devices:

HP 14 Laptop
HP 15 Laptop

Realtek Card Reader Driver

File: sp152849.exe

Operating System: Windows 11 x64 File Size: 2.2 MB Driver Version: 10.0.22631.31285 REV: C Driver Type: Card Reader Driver File Extention: .exe
SHA-256 Checksum: 54e4e0437f63b87c6d04008cd9c6c01fdff7ab5fb5bc18829cf5d357da115e8c