(hp) Intel Serial IO Driver 30.100.2129.8 Rev.E for Windows 11 (64-bit)

HP Intel Serial IO Driver 30.100.2129.8 Rev.E for Windows 11 (64-bit)
Version:
30.100.2129.8 Rev.E
Operating System(s)

The HP Intel Serial IO Driver provides support for Intel Serial Input/Output controllers used by compatible HP computers. These controllers manage communication between the processor and various onboard devices, including I2C, SPI, and UART-connected hardware. Installing the correct driver helps Windows properly recognize and communicate with supported system components, including certain touchpads and other integrated devices.

Driver Installation

  1. Download sp152867.exe.
  2. Right-click the downloaded file and select Run as administrator.
  3. Follow the HP installation instructions to extract and install the driver.
  4. Allow the installation to finish.
  5. Restart Windows if prompted.

Troubleshooting

  • Unknown Device in Device Manager: Check under System devices for Intel Serial IO controller entries with missing drivers.
  • Touchpad Not Working: Some HP touchpads rely on Intel I2C communication. Installing the Serial IO driver may resolve detection problems.
  • Installation Fails: Make sure you are running the 64-bit version of Windows 11 and that the package supports your HP computer.
  • Driver Still Missing: Check Device Manager for hardware IDs to identify the specific controller requiring a driver.

Note: This is an HP-specific driver package. Not every HP computer uses the same Intel Serial IO hardware, so verify your system model before installing.

Intel Serial IO Driver

File: sp152867.exe

Operating System: Windows 11 64bit File Size: 926 KB Driver Version: 30.100.2129.8 REV: E Driver Type: Chipset Driver File Extention: .exe
SHA-256 Checksum: 951bee5cff0b0225e450fbbe54056a3f0d2c62eaa124151433c89c3627e1751f