Creative Video Blaster Web Cam II is a veteran of the webcam technology. This device was able to be used on the Parallel Port (Printer Port). The Video Blaster WebCam II can be autofocus, manual or fixed. Auto and manual allow the camera to be adjusted to achieve the best focus point. Fixed focus lenses have a predefined focus range and cannot be adjusted.
Creative Video Blaster WebCam II - Webcam
Device Type: Webcam
Black color
Camera: Color
Maximum Resolution: 176 x 144
Optical sensor type: CMOS - 352 x 288
Focus adjustment: (min. Distance 50 mm)
Manufacturer Warranty: 1 Year Warranty
General
Device Type: Webcam
Camera
Type: Color
Maximum Digital Video Resolution: 176 x 144
Still Resolution Image Capture: 320 x 240, 352 x 288
Image sensor
Type: 352 x 288 CMOS
Lens construction
Min Focal Length: 50mm
Expansion / Connectivity
Interfaces: 1 x Parallel - IEEE 1284 (EPP / ECP) - 25-pin D-Sub (DB-25) | 1 x Microphone - Input - 3.5mm Mono Mini Headset
Miscellaneous
Cables included: 1 x Parallel Cable - Integrated - 1.8 m
Black color
Minimum system requirements to use Video Blaster WebCam II parallel port version:
Microsoft Windows 95 or Windows 98
An available bidirectional parallel port
100 MHz Pentium® or higher IBM® compatible PC
A CD-ROM drive required for software installation.
A modem or LAN access to the Internet (Creative Video WebPhone conferencing software requires 14.4Kb for voice communication and 28.8Kb for voice and video access)
A video adapter capable of 16-bit color at 800 × 600
16 MB RAM
Available 70 MB disk space when installing all software titles simultaneously
A Sound Blaster® or other Windows compatible sound card and microphone connector is required for creative WebPhone video.
For optimal performance:
133 MHz Pentium or higher IBM compatible PC
ECP Parallel Port
Simultaneous two-way conversation requires a Sound Blaster® 16 or higher, or other Windows-compatible, full-duplex supported sound card.
Minimum system requirements to use the USB port version of Video Blaster WebCam II:
Microsoft Windows 98 (Windows 95 is not supported)
An available USB port or USB hub (Video Blaster WebCam II is a high power USB device)
100 MHz Pentium® or higher IBM® compatible PC
A CD-ROM drive is required for software installation.
A modem or LAN access to the Internet (Creative Video WebPhon conferencing software requires 14.4Kb access for voice communication and 28.8Kb for voice and video)
A video adapter capable of 16-bit color at 800 × 600
16 MB RAM
Available 70 MB disk space when installing all software titles simultaneously
Sound Blaster® or other Windows compatible sound card and microphone connector required for creative WebPhone Video
For optimal performance of any version:
133 MHz Pentium or higher IBM compatible PC
Sound Blaster 16 or higher, or another Windows-compatible sound card with full duplex support for simultaneous two-way conversation
