The HP Wireless Button Driver provides support for the wireless control button found on compatible HP notebooks. This software allows Windows to properly recognize and communicate with the notebook's wireless button, which can be used to enable or disable wireless connectivity, including Wi-Fi and Bluetooth, depending on the system configuration. Installing the driver can help restore wireless button functionality if Windows does not respond correctly when the button is pressed.
Driver Installation
- Download
sp141277.exe. - Right-click the downloaded file and select Run as administrator.
- Follow the HP installation instructions to extract and install the driver.
- Allow the installation to complete.
- Restart Windows if prompted.
Troubleshooting
- Wireless Button Not Responding: Check Device Manager for missing HP wireless button or system interface components.
- Wi-Fi Not Turning On: Make sure the wireless network adapter itself is installed and enabled.
- Airplane Mode Issues: Check Windows Settings under Network & Internet to verify that Airplane Mode is disabled.
- Installation Problems: Verify that your HP notebook supports this driver and that you are using the 64-bit version of Windows.
Note: The Wireless Button Driver does not replace the Wi-Fi or Bluetooth adapter drivers. It provides the software interface needed for the physical wireless button to communicate correctly with supported HP hardware.
HP Wireless Button Driver
File: sp141277.exe
90ca2406e833d0a29616c3937ba9249d27a682a1f256441c539649ba8a571a9e
All Model numbers for this device
Compatible Devices:
HP ZHAN 99 G3 Mobile Workstation
HP 15 15.6 Laptop
HP ZHAN 99 G2 Mobile Workstation
HP 14 Laptop
Victus by HP 16 Laptop PC
HP 15 Laptop
HP 470 G8 Notebook PC
HP Pavilion Gaming 15 Laptop
HP Pavilion 15 15.6 Laptop
HP 240 G8 Notebook PC
HP 245 G8 Notebook PC
HP Pavilion 15 Laptop
HP Stream 11 Laptop
HP 247 G8 Notebook PC
HP Pavilion Gaming 17 Laptop