Hitachi DVD CAM USB Driver for DZ-MV270A/E, 350A/E, 380A/E, 550A/E, and 580A/E
Installation Guide
-------------------------------------------------------------------------------
----------------------
Installing USB Driver
----------------------
1. Make sure that the DVD CAM is disconnected with your PC.
2. Double-click the "dzmvinst2" (or "dzmvinst2.exe") file in the "USB" folder that you downloaded.
3. Click the "USB Driver Installation" button.
4. Follow the instruction in the screen:
During the installation, the program may display messages "Continuing your installation of this software may impair or destabilize the correct operation of your system..." or "Microsoft strongly recommends that you stop this installation now...". In this case, click the "Continue Anyway" button.
Hitachi, Ltd. assures the quality of this USB driver.
5. When the installation completes, turn on and connect the DVD CAM with the PC.
------
Notes
------
- To connect the DVD CAM with the PC, software supporting the DVD-VR (Video Recording) such as DVD-MovieAlbumSE and PowerProducer2 Gold (CyberLink) is required in addition to the USB driver.
- To read pictures recorded on the DVD CAM's discs, the UDF driver (DVD-RAM driver) is optionally required.
- The UDF driver (DVD-RAM driver) and DVD-MovieAlbumSE for DZ-MV350A/E, 380A/E, 550A/E, and 580A/E are contained in the CD-ROM supplied with the DVD CAM, which are not distributed on the Hitachi websites due to the proprietary rights.
- The UDF driver (InstantWrite) for DZ-MV270A/E is contained in the CD-ROM supplied with the DVD CAM, which is not distributed on the Hitachi websites due to the proprietary rights.
- If you have lost the CD-ROM supplied with the DZ-MV270A/E, 350A/E, 380A/E, 550A/E, and 580A/E, you can order the replacement CD-ROM with the following part number:
- Part Number for the DZ-MV550A/E and DZ-MV580A/E CD-ROM (light yellow label):
DN11542
- Part Number for DZ-MV350A/E and DZ-MV380A/E CD-ROM (green label):
DN11261
