Allied Telesis AT-2971T v2 Gigabit Adapter

The Allied Telesis AT-2971T v2 Gigabit Adapter Drivers are below. These Drivers are compatible with numerous devices using Marvell chips.

Install Instructions

To install Allied Telesis AT-2971T v2 Gigabit Adapter

  1. Download one of the drivers below that is compatible with your operating system, extract the zip file to a location you are familiar with.
  2. Switch/Insert your hardware device (USB devices can be plugged in while machine is running, other devices plug-in with machine off.
  3. Go to the Windows Device Manager.
  4. Locate your Allied Telesis AT-2971T v2 Gigabit Adapter device in the list and press double click on the new device. Click Re-install driver button.
  5. Choose "Install from the specific location" and click on the Browse button a find where you extracted the driver files. Click on the Next and Finish button after that to complete the installation process.
  6. After successfully following these steps, you should see Allied Telesis AT-2971T v2 Gigabit Adapter device in Windows Devices List.

 

Drivers:

00
00