Marvell Yukon 88E8022 PCI-X IPMI Gigabit Ethernet Controller

The Marvell Yukon 88E8022 PCI-X IPMI Gigabit Ethernet Controller Drivers are below. These Drivers are compatible with numerous devices using Marvell chips.

Install Instructions

To install Marvell Yukon 88E8022 PCI-X IPMI Gigabit Ethernet Controller

  1. Download one of the drivers below that is compatible with your operating system, extract the zip file to a location you are familiar with.
  2. Switch/Insert your hardware device (USB devices can be plugged in while machine is running, other devices plug-in with machine off.
  3. Go to the Windows Device Manager.
  4. Locate your Marvell Yukon 88E8022 PCI-X IPMI Gigabit Ethernet Controller device in the list and press double click on the new device. Click Re-install driver button.
  5. Choose "Install from the specific location" and click on the Browse button a find where you extracted the driver files. Click on the Next and Finish button after that to complete the installation process.
  6. After successfully following these steps, you should see Marvell Yukon 88E8022 PCI-X IPMI Gigabit Ethernet Controller device in Windows Devices List.

Drivers:

00
00