The 2018 Nokia x7 (Nokia 8.1) looks a lot like an iPhone except better. Known as the Nokia X7 in China, is a Nokia-branded mid-range smartphone by HMD Global. It was announced on 6 December 2018. Drivers to connect the x7 to your computer are below. Due to the fact there is a Nokia x7 that came 2011 this phone is often confused. The drivers to unlock, backup and other features are below.
GSM / CDMA / HSPA / LTE
Launch: Announced: 2018, December
Status: Available. Released 2018, December
Body: Dimensions: 154.8 x 75.8 x 8 mm (6.09 x 2.98 x 0.31 in)
Weight: 180 g (6.35 oz)
Build: Glass front, glass back, plastic frame
SIM: Hybrid Dual SIM (Nano-SIM, dual stand-by)
Display: Type: IPS LCD capacitive touchscreen, 16M colors
Size: 6.18 inches, 95.3 cm2 (~81.2% screen-to-body ratio)
Resolution: 1080 x 2280 pixels, 19:9 ratio (~408 ppi density)
Platform: OS: Android 9.0 (Pie), upgradable to Android 10.0; Android One
Chipset: Qualcomm SDM710 Snapdragon 710 (10 nm)
CPU: Octa-core (2x2.2 GHz 360 Gold & 6x1.7 GHz Kryo 360 Silver)
GPU: Adreno 616
Memory: Card slot: microSDXC (uses shared SIM slot)
Internal: 64GB 4GB RAM, 64GB 6GB RAM, 128GB 6GB RAM
: eMMC 5.1
Main Camera: Dual: 12 MP, f/1.8, 1/2.55", 1.4µm, dual pixel PDAF, OIS
Features: Zeiss optics, dual-LED dual-tone flash, panorama, HDR
Video: [email protected], [email protected] (gyro-EIS)
Selfie camera: Single: 20 MP, f/2.0, (wide), 1/3", 0.9µm
Video: [email protected]
Sound: Loudspeaker: Yes
3.5mm jack: Yes
Comms: WLAN: Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 5.0, A2DP, LE
GPS: Yes, with A-GPS, GLONASS, BDS
Radio: FM radio
USB: 2.0, Type-C 1.0 reversible connector, USB On-The-Go
Features: Sensors: Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass
Battery: : Non-removable Li-Ion 3500 mAh battery
Charging: Fast charging 18W
Step 1 — Download and extract the Android USB Driver to your PC.
Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).
Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.
Step 4 — Select Next
Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next
Step 6 — Select Show All Devices afterward click Next button again.
Step 7 — Click the Have Disk button.
Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.
Step 9 — Click OK.
Step 10 — Now select the Android ADB Interface -> click Next button.
Step 11 — Click Next button again.
Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.
Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.
Step 14 - Done.