Insignia™ NS-PSB4521 Desktop Speaker System

📶 Pairing with a Bluetooth Device

1. Turn on your speaker system.
   If a 3.5 mm cable is not connected to the AUX jack, the speaker automatically enters Bluetooth mode.
   • The blue LED blinks rapidly in pairing mode.
   • The blue LED stays solid when paired.
2. Enter pairing mode manually (if needed):
   • Press and hold the Power/Pairing button for 3 seconds until the blue LED blinks rapidly.
3. Place your Bluetooth device within 33 feet (10 meters) of the speaker system.
4. Enable Bluetooth on your source device and set it to pairing mode.
   (Refer to your device's manual if needed.)
5. Select Insignia NS-PSB4521 from the list of available Bluetooth devices.
   • Once paired, the blue LED will remain solid.

Note:

• If pairing with a computer, ensure the speaker is set as the default playback device in your system settings.
• Your Bluetooth device must support Bluetooth 3.0 + EDR A2DP.
• Make sure it’s not already paired to another device.
• Check your device’s documentation to confirm supported Bluetooth protocols.

🔁 Reconnecting to a Paired Device

1. Turn on your speaker system.
2. Ensure that:
   • Your Bluetooth device is on
   • Bluetooth is enabled on the device
   • The device is within range (33 feet)
   • There are no obstructions between the speaker and device

Note:
If the speaker and device do not reconnect automatically, manually select
Insignia NS-PSB4521 on your Bluetooth device

For more information see the documentation below