Like many of the early S3 graphic cards this one share drivers with earlier models, most of the cards that contain the P86C924 GPU have switches allowing video modes (or resolutions) by default as monitors back in the early days couldn’t display video over 640x480 and sometimes not even that. To view the switch configuration for the Wizard 924 expand the Addition configurations section below.
Show: Full Specs/Additional configurations
SIXGRAPH COMPUTING LTD.
WIZARD 924
Category | Video |
Video Types Supported | XVGA |
Video Processor | S3 86C924 |
Highest Resolution Supported | 1280 x 1024 |
Data Bus Type | 16-bit ISA |
Memory Type | VRAM |
Maximum Onboard Memory | 1024KB |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
15-pin analog video connector | CN1 | Feature connector | CN2 |
Note:Contact dealer when using feature connector as it is not VESA standard. |
VIDEO FREQUENCY SETTINGS | ||||||
Frequency | Mode | SW1/5 | SW1/6 | SW1/7 | SW1/8 | |
» | 640 x 480 | Non-interlaced | On | On | On | On |
1280 x 1024 | Non-interlaced | Off | On | On | On | |
1280 x 1024 | Interlaced | On | Off | Off | Off | |
1024 x 768 | Non-interlaced | On | Off | Off | Off | |
1024 x 768 | Non-interlaced | On | Off | On | On | |
1024 x 768 | Interlaced | On | Off | On | Off | |
800 x 600 | Non-interlaced | On | Off | On | On | |
800 x 600 | Non-interlaced | On | On | Off | Off | |
800 x 600 | Non-interlaced | On | On | Off | On | |
640 x 480 | Non-interlaced | On | On | On | Off |
TURBO MODE SELECT | ||
Turbo | SW1/2 | |
» | Disabled | Off |
Enabled | On |
VIDEO INTERRUPT SELECT | ||
IRQ9 | SW1/3 | |
» | Enabled | On |
Disabled | Off |
BUS WIDTH SELECTION | ||
Size | SW1/4 | |
» | 8-bit | Off |
16-bit | On |
FACTORY CONFIGURED SETTINGS | |
Switch | Setting |
SW1/1 | Off |