In order to be able to do more technical changes to your Infinix S5 Pro you will need to install some extra software on your computer system to bridge to flash custom firmware. Only do any of these technical functions to your phone if it is out of warranty and know that there is a risk of permanent damage to the device. Custom ROM can be found at XDA developers forum. Drivers for ADB, CDC & VCOM functions are below.
Brand: Infinix
Model: S5 Pro
Form factor: Touchscreen
Dimensions (mm): 162.50 x 76.88 x 8.95
Weight (g): 194.00
Battery capacity (mAh): 4000
Screen size (inches): 6.53
Resolution: 1080x2220 pixels
Aspect ratio: 19.5:9
Processor: 2.3GHz octa-core
Processor make: MediaTek Helio P35 (MT6765)
Show: Full Specs/Additional configurations
Brand: Infinix
Model: S5 Pro
Launched: 6th March 2020
Form factor: Touchscreen
Dimensions (mm): 162.50 x 76.88 x 8.95
Weight (g): 194.00
Battery capacity (mAh): 4000
Colours: Forest Green, Violet
Display
Screen size (inches): 6.53
Resolution: 1080x2220 pixels
Aspect ratio: 19.5:9
Hardware
Processor: 2.3GHz octa-core
Processor make: MediaTek Helio P35 (MT6765)
RAM: 4GB
Internal storage: 64GB
Expandable storage: No
Expandable storage type: microSD
Expandable storage up to (GB): 256
Dedicated microSD slot: Yes
Camera
Rear camera: 48-megapixel (f/1.79) + 2-megapixel
Rear autofocus: Yes
Rear flash: Yes
Front camera: 16-megapixel (f/2.0)
Pop-Up Camera: Yes
Software
Operating system: Android 10
Skin: XOS 6.0
Connectivity
Wi-Fi: Yes
Wi-Fi standards supported: 802.11 a/b/g/n
GPS: Yes
Bluetooth: Yes, v 5.00
Micro-USB: Yes
Headphones: 3.5mm
Number of SIMs: 2
Active 4G on both SIM cards: Yes
SIM 1
SIM Type: Nano-SIM
3G: Yes
4G/ LTE: Yes
Supports 4G in India (Band 40): Yes
SIM 2
SIM Type: Nano-SIM
3G: Yes
4G/ LTE: Yes
Supports 4G in India (Band 40): Yes
Sensors
Face unlock: Yes
Fingerprint sensor: Yes
Compass/ Magnetometer: Yes
Proximity sensor: Yes
Accelerometer: Yes
Ambient light sensor: Yes
Gyroscope: Yes
Step 1 — Download and extract the Android USB Driver to your PC.
Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).
Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.
Step 4 — Select Next
Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next
Step 6 — Select Show All Devices afterward click Next button again.
Step 7 — Click the Have Disk button.
Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.
Step 9 — Click OK.
Step 10 — Now select the Android ADB Interface -> click Next button.
Step 11 — Click Next button again.
Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.
Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.
Step 14 - Done.
