Yaesu FT-991A Drivers

Unlike many other modern radios the Yaesu FT-991A can be programmed simply using a USB cable. This radio already has a built in Silicon Chips CP210x chip built in.

Step 1: Download and Install USB Drivers

  1. Download USB Drivers:
    • From the same support page, download the USB drivers for the FT-991A.
  2. Install USB Drivers:
    • Extract the downloaded file if it is compressed.
    • Run the installer and follow the on-screen instructions to install the drivers.

Step 2: Connect Your FT-991A to Your Computer

  1. Connect via USB:
    • Turn off your FT-991A.
    • Use a USB cable to connect the radio to your computer.
    • Turn on the FT-991A.
  2. Verify Connection:
    • Open "Device Manager" on your Windows computer (you can find it by searching in the Start menu).
    • Look for the COM port associated with the FT-991A under "Ports (COM & LPT)". The port should be listed as "Silicon Labs CP210x USB to UART Bridge" or similar.

Step 3: Program Your FT-991A

  1. Open the programming Software (let's use ADMS-991A as an example it isn't free. Website: https://www.rtsystemsinc.com/FT-991A_c_807.html):
    • Launch the ADMS-991A software.
  2. Read from the Radio:
    • In the software, select the appropriate COM port that matches your FT-991A.
    • Use the option to "Read from Radio" to download the current settings from your FT-991A.
  3. Edit Settings:
    • Make the desired changes to the radio settings using the software interface.
  4. Upload to the Radio:
    • Once you have made the changes, use the option to "Write to Radio" to upload the new settings to your FT-991A.

Troubleshooting

  • Driver Issues: If the USB drivers do not install correctly, ensure you downloaded the correct version for your Windows OS and try reinstalling.
  • Connection Issues: Verify that the USB cable is properly connected and the COM port is recognized in Device Manager.
  • Software Issues: Ensure you are using the latest version of the ADMS-991A software.

Drivers: