Gemalto IDBridge CT40 is a card reader that is still sold today, and works on nearly all operating system all the way back to Windows 98.
Smartcard Interface: GemCore Pro hardware and firmware architecture
Supports:
- ISO7816 Class A, B and C (5V, 3V, 1.8V)
- ISO7816 TA1 parameters up to 344 kbps)
Reads from and writes to all ISO7816-1,2,3 microprocessor cards, T=0 and T=1
Short circuit detection
Smartcard Connector: - 8 friction contacts - ISO location
- 100,000 insertion cycles
- EMV level 1 mechanically compliant
- embossed smartcards supported
Human Interface: LED one colour (green)
Show: Full Specs/Additional configurations
Host Interface: Plug and Play
Smartcard Interface: GemCore Pro hardware and firmware architecture
Supports:
- ISO7816 Class A, B and C (5V, 3V, 1.8V)
- ISO7816 TA1 parameters up to 344 kbps)
Reads from and writes to all ISO7816-1,2,3 microprocessor cards, T=0 and T=1
Short circuit detection
Smartcard Connector: - 8 friction contacts - ISO location
- 100,000 insertion cycles
- EMV level 1 mechanically compliant
- embossed smartcards supported
Human Interface: LED one colour (green)
Standards/Certifications: ISO/IEC 7816-1,2,3,4: IC Cards with contacts
EMV Terminal level 1 version 4.0
WHQL
USB 2.0 Full speed
CCID 1.0
APIs: Microsoft PC/SC environment with associated drivers
Operating Systems Support: Windows 98, 98SE, Me, 2000, XP, Vista and 7
Other OS supported upon request (Linux, MacOS X)
Cable/Power Supply GemPC USB-SL: - cable 1.5m long
- USB type A connector
- power supply thru USB port
- op. voltage [4.4 - 5.5V]
Environmental Performances: - CE, FCC part 15 Class B, VCCI, BSMI, C-Tick
- EN 60950/UL950/CSA950
- operating temperature: +5C to +55C
- storage temperature: -25C to +60C
Dimensions: LWH 105 x 70 x 12 mm
