Xiaomi Black Shark 4 Pro USB Drivers

The drivers to connect/unlock the Xiaomi Black Shark 4 Pro smart phone to backup,tether, network and more are below. Be aware if you are looking to unlock the bootloader or other advanced software functions it most likely will void any existing warranty. Also Functions used at the fastboot screen can wipe the phones data, be sure to have a full backup before conducting any technical procedures. Look at the specs on this page, if your device uses Mediatek chipset use MTK Drivers, if your device has a Qualcomm chipset then use Qualcomm drivers.

Basic Specs:

SIM: Dual SIM (Nano-SIM, dual stand-by)
: Physical pop-up gaming triggers
Display: Type: Super AMOLED, 144Hz, HDR10+, 1300 nits (peak)
Size: 6.67 inches, 107.4 cm2 (~85.8% screen-to-body ratio)
Resolution: 1080 x 2400 pixels, 20:9 ratio (~395 ppi density)
: Always-on display
Platform: OS: Android 11, Joy UI 12.5

Full Specs/Additional configurations
Show: Full Specs/Additional configurations

Body: Dimensions: 163.8 x 76.4 x 9.9 mm (6.45 x 3.01 x 0.39 in)
Weight: 220 g (7.76 oz)
SIM: Dual SIM (Nano-SIM, dual stand-by)
: Physical pop-up gaming triggers
Display: Type: Super AMOLED, 144Hz, HDR10+, 1300 nits (peak)
Size: 6.67 inches, 107.4 cm2 (~85.8% screen-to-body ratio)
Resolution: 1080 x 2400 pixels, 20:9 ratio (~395 ppi density)
: Always-on display
Platform: OS: Android 11, Joy UI 12.5
Chipset: Qualcomm SM8350 Snapdragon 888 5G (5 nm)
CPU: Octa-core (1x2.84 GHz Kryo 680 & 3x2.42 GHz Kryo 680 & 4x1.80 GHz Kryo 680
GPU: Adreno 660
Memory: Card slot: No
Internal: 256GB 8GB RAM, 256GB 12GB RAM, 512GB 16GB RAM
: UFS 3.1
Main Camera: Triple: 64 MP, f/1.8, (wide), 1/1.97", 0.7µm, PDAF
8 MP, f/2.2, 120˚ (ultrawide), 1/4.0", 1.12µm
5 MP, f/2.4, (macro), AF
Features: LED flash, HDR, panorama
Video: 4K@30/60fps, 1080p@30/60/240fps, 1080p@960fps; HDR10+
Selfie camera: Single: 20 MP, f/2.5, (wide), 0.8µm
Features: HDR
Video: 1080p@30fps
Sound: Loudspeaker: Yes, with stereo speakers
3.5mm jack: Yes
: 24-bit/192kHz audio
Comms: WLAN: Wi-Fi 802.11 a/b/g/n/ac/6, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 5.2, A2DP, LE, aptX HD, aptX Adaptive
GPS: Yes, with A-GPS, GLONASS, GALILEO, QZSS, BDS
NFC: Yes
Radio: No
USB: USB Type-C 2.0
Features: Sensors: Fingerprint (side-mounted), accelerometer, gyro, proximity, compass, barometer
Battery: Type: Li-Po 4500 mAh, non-removable
Charging: Fast charging 120W, 50% in 5 min, 100% in 15 min

Install Instructions

Step 1 — Download and extract the Android USB Driver to your PC.

Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).

Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.

Step 4 — Select Next

Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next

Step 6 — Select Show All Devices afterward click Next button again.

Step 7 — Click the Have Disk button.

Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.

Step 9 — Click OK.

Step 10 — Now select the Android ADB Interface -> click Next button.

Step 11 — Click Next button again.

Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.

Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.

Step 14  - Done.

Download: