Xiaomi Mi 10S USB Drivers

The drivers to connect/unlock the Xiaomi Mi 10S smart phone to backup,tether, network and more are below. Be aware if you are looking to unlock the bootloader or other advanced software functions it most likely will void any existing warranty. Also Functions used at the fastboot screen can wipe the phones data, be sure to have a full backup before conducting any technical procedures. Look at the specs on this page, if your device uses Mediatek chipset use MTK Drivers, if your device has a Qualcomm chipset then use Qualcomm drivers.

Basic Specs:

Display: Type: AMOLED, 90Hz, HDR10+, 500 nits (typ), 1120 nits (peak)
Size: 6.67 inches, 109.2 cm2 (~89.8% screen-to-body ratio)
Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~386 ppi density)
Protection: Corning Gorilla Glass 5
Platform: OS: Android 11, MIUI 12

Full Specs/Additional configurations
Show: Full Specs/Additional configurations

Body: Dimensions: 162.6 x 74.8 x 9 mm (6.40 x 2.94 x 0.35 in)
Weight: 208 g (7.34 oz)
SIM: Dual SIM (Nano-SIM, dual stand-by)
Display: Type: AMOLED, 90Hz, HDR10+, 500 nits (typ), 1120 nits (peak)
Size: 6.67 inches, 109.2 cm2 (~89.8% screen-to-body ratio)
Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~386 ppi density)
Protection: Corning Gorilla Glass 5
Platform: OS: Android 11, MIUI 12
Chipset: Qualcomm SM8250-AC Snapdragon 870 5G (7 nm)
CPU: Octa-core (1x3.2 GHz Kryo 585 & 3x2.42 GHz Kryo 585 & 4x1.80 GHz Kryo 585)
GPU: Adreno 650
Memory: Card slot: No
Internal: 128GB 8GB RAM, 256GB 8GB RAM, 256GB 12GB RAM
: UFS 3.0
Main Camera: Quad: 108 MP, f/1.7, 26mm (wide), 1/1.33", 0.8µm, PDAF, OIS
13 MP, f/2.4, 123˚ (ultrawide)
2 MP, f/2.4, (macro)
2 MP, f/2.4, (depth)
Features: Dual-LED dual-tone flash, HDR, panorama
Video: [email protected], [email protected]/60fps, [email protected]/60/120fps; gyro-EIS
Selfie camera: Single: 20 MP, (wide), 1/3.4", 0.8µm
Features: HDR, panorama
Video: [email protected], [email protected]
Sound: Loudspeaker: Yes, with stereo speakers
3.5mm jack: No
: 24-bit/192kHz audio
Tuned by Harman Kardon
Comms: WLAN: Wi-Fi 802.11 a/b/g/n/ac/6, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 5.1, A2DP, LE, aptX HD, aptX Adaptive
GPS: Yes, with dual-band A-GPS, GLONASS, BDS, GALILEO, QZSS
NFC: Yes
Infrared port: Yes
Radio: No
USB: USB Type-C 2.0, USB On-The-Go
Features: Sensors: Fingerprint (under display, optical), accelerometer, gyro, proximity, compass, barometer
Battery: Type: Li-Po 4780 mAh, non-removable
Charging: Fast charging 33W, 100% in 56 min (advertised)
Fast wireless charging 30W, 100% in 69 min (advertised)
Reverse wireless charging 10W
Power Delivery 3.0
Quick Charge 4+

Install Instructions

Step 1 — Download and extract the Android USB Driver to your PC.

Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).

Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.

Step 4 — Select Next

Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next

Step 6 — Select Show All Devices afterward click Next button again.

Step 7 — Click the Have Disk button.

Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.

Step 9 — Click OK.

Step 10 — Now select the Android ADB Interface -> click Next button.

Step 11 — Click Next button again.

Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.

Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.

Step 14  - Done.

Download:

00
00