Xiaomi Mi 11 Lite USB Drivers

The drivers to connect/unlock the Xiaomi Mi 11 Lite smart phone to backup,tether, network and more are below. Be aware if you are looking to unlock the bootloader or other advanced software functions it most likely will void any existing warranty. Also Functions used at the fastboot screen can wipe the phones data, be sure to have a full backup before conducting any technical procedures. Look at the specs on this page, if your device uses Mediatek chipset use MTK Drivers, if your device has a Qualcomm chipset then use Qualcomm drivers.

Basic Specs:

SIM: Hybrid Dual SIM (Nano-SIM, dual stand-by)
: IP53, dust and splash protection
Display: Type: AMOLED, 1B colors, HDR10, 90Hz, 500 nits (typ), 800 nits
Size: 6.55 inches, 103.6 cm2 (~85.3% screen-to-body ratio)
Resolution: 1080 x 2400 pixels, 20:9 ratio (~402 ppi density)
Protection: Corning Gorilla Glass 5
Platform: OS: Android 11, MIUI 12

Full Specs/Additional configurations
Show: Full Specs/Additional configurations

Body: Dimensions: 160.5 x 75.7 x 6.8 mm (6.32 x 2.98 x 0.27 in)
Weight: 157 g (5.54 oz)
SIM: Hybrid Dual SIM (Nano-SIM, dual stand-by)
: IP53, dust and splash protection
Display: Type: AMOLED, 1B colors, HDR10, 90Hz, 500 nits (typ), 800 nits
Size: 6.55 inches, 103.6 cm2 (~85.3% screen-to-body ratio)
Resolution: 1080 x 2400 pixels, 20:9 ratio (~402 ppi density)
Protection: Corning Gorilla Glass 5
Platform: OS: Android 11, MIUI 12
Chipset: Qualcomm SM7150 Snapdragon 732G (8 nm)
CPU: Octa-core (2x2.3 GHz Kryo 470 Gold & 6x1.8 GHz Kryo 470 Silver)
GPU: Adreno 618
Memory: Card slot: microSDXC (uses shared SIM slot)
Internal: 64GB 6GB RAM, 128GB 6GB RAM, 128GB 8GB RAM
: UFS 2.2
Main Camera: Triple: 64 MP, f/1.8, 26mm (wide), 1/1.97", 0.7µm, PDAF
8 MP, f/2.2, 119˚ (ultrawide), 1/4.0", 1.12µm
5 MP, f/2.4, (macro), AF
Features: Dual-LED dual-tone flash, HDR, panorama
Video: 4K@30fps, 1080p@30/60/120fps; gyro-EIS
Selfie camera: Single: 16 MP, f/2.5, 25mm (wide), 1/3.06" 1.0µm
Features: HDR, panorama
Video: 1080p@30fps, 720p@120fps
Sound: Loudspeaker: Yes, with dual speakers
3.5mm jack: No
: 24-bit/192kHz audio
Comms: WLAN: Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 5.1, A2DP, LE
GPS: Yes, A-GPS, GLONASS, BDS, GALILEO
NFC: Yes (market/region dependent)
Infrared port: Yes
Radio: Unspecified
USB: USB Type-C 2.0, USB On-The-Go
Features: Sensors: Fingerprint (side-mounted), accelerometer, gyro, proximity, compass
Battery: Type: Li-Po 4250 mAh, non-removable
Charging: Fast charging 33W

Install Instructions

Step 1 — Download and extract the Android USB Driver to your PC.

Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).

Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.

Step 4 — Select Next

Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next

Step 6 — Select Show All Devices afterward click Next button again.

Step 7 — Click the Have Disk button.

Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.

Step 9 — Click OK.

Step 10 — Now select the Android ADB Interface -> click Next button.

Step 11 — Click Next button again.

Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.

Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.

Step 14  - Done.

Download: