The drivers to connect/unlock the Xiaomi Redmi Note 10S smart phone to backup,tether, network and more are below. Be aware if you are looking to unlock the bootloader or other advanced software functions it most likely will void any existing warranty. Also Functions used at the fastboot screen can wipe the phones data, be sure to have a full backup before conducting any technical procedures. Look at the specs on this page, if your device uses Mediatek chipset use MTK Drivers, if your device has a Qualcomm chipset then use Qualcomm drivers.
Display: Type: IPS LCD, 90Hz, 400 nits (typ)
Size: 6.5 inches, 102.0 cm2 (~83.7% screen-to-body ratio)
Resolution: 1080 x 2400 pixels, 20:9 ratio (~405 ppi density)
Protection: Corning Gorilla Glass 3
Platform: OS: Android 11, MIUI 12
Show: Full Specs/Additional configurations
Body: Dimensions: 161.8 x 75.3 x 8.9 mm (6.37 x 2.96 x 0.35 in)
Weight: 190 g (6.70 oz)
SIM: Dual SIM (Nano-SIM, dual stand-by)
Display: Type: IPS LCD, 90Hz, 400 nits (typ)
Size: 6.5 inches, 102.0 cm2 (~83.7% screen-to-body ratio)
Resolution: 1080 x 2400 pixels, 20:9 ratio (~405 ppi density)
Protection: Corning Gorilla Glass 3
Platform: OS: Android 11, MIUI 12
Chipset: MediaTek MT6833 Dimensity 700 5G (7 nm)
CPU: Octa-core (2x2.2 GHz Cortex-A76 & 6x2.0 GHz Cortex-A55)
GPU: Mali-G57 MC2
Memory: Card slot: microSDXC (dedicated slot)
Internal: 64GB 4GB RAM, 128GB 4GB RAM, 128GB 6GB RAM
: UFS 2.2
Main Camera: Triple: 48 MP, f/1.8, 26mm (wide), 1/2.0", 0.8µm, PDAF
2 MP, f/2.4, (macro)
2 MP, f/2.4, (depth)
Features: Dual-LED dual-tone flash, HDR, panorama
Video: 1080p@30fps
Selfie camera: Single: 8 MP, f/2.0, (wide)
Video: 1080p@30fps
Sound: Loudspeaker: Yes
3.5mm jack: Yes
: 24-bit/192kHz audio
Comms: WLAN: Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 5.1, A2DP, LE
GPS: Yes, with A-GPS, GLONASS, GALILEO, BDS
NFC: Yes (market/region dependent)
Infrared port: Yes
Radio: No
USB: USB Type-C 2.0
Features: Sensors: Fingerprint (side-mounted), accelerometer, gyro, proximity, compass
Battery: Type: Li-Po 5000 mAh, non-removable
Charging: Fast charging 18W
Step 1 — Download and extract the Android USB Driver to your PC.
Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).
Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.
Step 4 — Select Next
Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next
Step 6 — Select Show All Devices afterward click Next button again.
Step 7 — Click the Have Disk button.
Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.
Step 9 — Click OK.
Step 10 — Now select the Android ADB Interface -> click Next button.
Step 11 — Click Next button again.
Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.
Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.
Step 14 - Done.
