ZTE Nubia Red Magic Mars USB Drivers

In order to be able to do more technical changes to your ZTE Nubia Red Magic Mars you will need to install some extra software on your computer system to bridge to flash custom firmware. Only do any of these technical functions to your phone if it is out of warranty and know that there is a risk of permanent damage to the device. Custom ROM can be found at XDA developers forum, also for ADB, CDC & VCOM functions are below.

Android based phones that use ADB drivers to interface with the phone to access advanced features that an advanced user of a phone may want to access. Changing the operating system/Custom ROM is one of the primary reasons to use it. For example, Linage OS which is a clean version of Android that has bloatware removed from it or Ubuntu touch which is a port of Ubuntu for mobile phones. Whatever you are going to do via the USB port that isn’t just accessing photos or other content that would be accessible with standard mass storage USB drivers will be done with the ADB interface, and whatever drivers are needed for your chipset.

Basic Specs:

Network: Technology:
GSM / CDMA / HSPA / EVDO / LTE
Body: Dimensions: 158.2 x 75 x 9.9 mm (6.23 x 2.95 x 0.39 in)
Weight: 193 g (6.81 oz)
Build: Glass front (Dinorex T2X-1), aluminum back, aluminum frame
SIM: Dual SIM (Nano-SIM, dual stand-by)

Full Specs/Additional configurations
Show: Full Specs/Additional configurations

Network: Technology:
GSM / CDMA / HSPA / EVDO / LTE
Launch: Announced: 2018, November
Status: Available. Released 2018, December
Body: Dimensions: 158.2 x 75 x 9.9 mm (6.23 x 2.95 x 0.39 in)
Weight: 193 g (6.81 oz)
Build: Glass front (Dinorex T2X-1), aluminum back, aluminum frame
SIM: Dual SIM (Nano-SIM, dual stand-by)
: RGB light panel (on the back)
Display: Type: LTPS IPS LCD
Size: 6.0 inches, 92.9 cm2 (~78.3% screen-to-body ratio)
Resolution: 1080 x 2160 pixels, 18:9 ratio (~402 ppi density)
Protection: Dinorex T2X-1 scratch/shock resistant glass
Platform: OS: Android 9.0 (Pie), Redmagic 1.0
Chipset: Qualcomm SDM845 Snapdragon 845 (10 nm)
CPU: Octa-core (4x2.8 GHz Kryo 385 Gold & 4x1.7 GHz Kryo 385 Silver)
GPU: Adreno 630
Internal: 64GB 6GB RAM, 128GB 8GB RAM, 256GB 10GB RAM
Main Camera: Single: 16 MP, f/1.8, PDAF
Features: LED flash, HDR, panorama
Video: [email protected], [email protected]
Selfie camera: Single: 8 MP, f/2.0
Features: HDR
Video: [email protected]
Sound: Loudspeaker: Yes
3.5mm jack: Yes
: 32-bit/384kHz audio
Comms: WLAN: Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 5.0, A2DP, aptX, LE
GPS: Yes, with A-GPS, GLONASS, BDS
USB: USB Type-C, USB On-The-Go
Features: Sensors: Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass
Battery: Type: Li-Po 3800 mAh, non-removable
Charging: Fast charging 18W

Install Instructions

Step 1 — Download and extract the Android USB Driver to your PC.

Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).

Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.

Step 4 — Select Next

Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next

Step 6 — Select Show All Devices afterward click Next button again.

Step 7 — Click the Have Disk button.

Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.

Step 9 — Click OK.

Step 10 — Now select the Android ADB Interface -> click Next button.

Step 11 — Click Next button again.

Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.

Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.

Step 14  - Done.

Download:

00
00