Canon MX920/MX922 driver

The Canon MX922 is a Multi-function printer that is available at many electronics stores. Drivers for canon mx922 can be downloaded at Canon’s website. Also, there is an archive below of Drivers that are current of writing this. To Install the drivers on a Windows or Mac based machine you need to have administration privileges, other than that setting up the MX922 is very straight forward. It should be noted that the MX920 is basically the same printer, so the drivers are the same. The Printer is USB or Networked so make sure that you install a method that is going to be practical for your office situation.

Basic Specs:

USB Flash Drive Port:
Bluetooth v2.0 (Option) *2*3
USB flash drive
LAN Port:
Wired LAN: 100BASE-TX/10BASE-T
Wireless LAN: IEEE802.11n/IEEE802.11g/IEEE802.11b *4
*1 A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.

Full Specs/Additional configurations
Show: Full Specs/Additional configurations

Hi-Speed USB *1
USB Flash Drive Port:
Bluetooth v2.0 (Option) *2*3
USB flash drive
LAN Port:
Wired LAN: 100BASE-TX/10BASE-T
Wireless LAN: IEEE802.11n/IEEE802.11g/IEEE802.11b *4
*1 A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
*2 Maximum speed: 1.44 Mbps
*3 Bluetooth connection is for printing only.
*4 Setup possible through Standard setup, WPS (Wi-Fi Protected Setup) or WCN (Windows Connect Now).
Print width
    
8 inches/203.2 mm
(for Borderless Printing: 8.5 inches/216 mm)
    
Platen Glass: A4/Letter, 8.5" x 11.7"/216 x 297 mm
ADF: A4/Letter/Legal, 8.5" x 14.0"/216 x 356 mm
Scanning resolution
resolution will limit the maximum possible scanning area.
Gradation (Input/Output)
    
Gray: 16 bit/8 bit
Color: 48 bit/24 bit (RGB each 16 bit/8 bit)
Fax Specifications
Applicable line
    
Public Switched Telephone Network (PSTN)
Communication mode
    
Super G3, G3
Data compressing system
    
Black: MH, MR, MMR
Color: JPEG
Modem speed
    
max. 33.6 kbps
(Automatic fallback)
Transmission speed
 
Network Specifications
Communication protocol
    
TCP/IP
Wired LAN
    
Supported Standards: IEEE802.3u (100BASE-TX)/IEEE802.3 (10BASE-T)
Transfer speed: 10 M/100 Mbps (auto switching)
Wireless LAN
    
Supported Standards: IEEE802.11n/IEEE802.11g/IEEE802.11b
Frequency bandwidth: 2.4 GHz
Channel: 1-11 or 1-13
* Frequency bandwidth and available channels differ depending on country or region.
Transfer speed (Standard value):
IEEE802.11n: max. 150 Mbps
IEEE802.11g: max. 54 Mbps
IEEE802.11b: max. 11 Mbps
* These values are a theoretical maximum transmission speed between the printer and an equivalent network device, and do not indicate the actual transmission speed obtained.
Communication distance: Indoors 164 feet/50 m
* Effective range varies depending on the installation environment and location.
Security:
WEP (64/128 bits)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)

Download:

 
5