Prolific PL2303

Prolific PL2303 USB to RS-232 Bridge Controller

The PL-2303 operates as a bridge between one USB port and one standard RS232 Serial port. The two large on-chip buffers accommodate data flow from two different buses. The USB bulk-type data is adopted for maximum data transfer. Automatic handshake is supported at the Serial port. With these, a much higher baud rate can be achieved compared to the legacy UART controller.

Drivers:

Prolific PL2303 Driver (USB to Serial) Windows/macOS Download

Device ID(s)

USB\VID_067B&PID_2303

Hawking HUC232S USB to RS232 Converter

Prolific PL2303 Driver 3.3.2.105 (Windows 11/10/8/7)

Prolific PL2303 Driver 3.6.81.357 (Windows OS) (Works on Windows 11)

GoldX GXMU-1200 6ft USB to Serial Converter Cable Drivers

BENFEI USB to Serial Adapter 000302

TAG Cords 400721USBC USB-C to DB9 Pin (male), (3')

Microsoft USB GPS Port 3.0.1.0 (Windows 8/7/Vista)

Dynex™ DX-UBDB9 USB PDA/Serial Adapter Cable

GlobalSat BU-353-W11 GPS GNSS Location Sensor Drivers

Sarcia hst060 Icom Programming Cable

Prolific USB-to-Serial Comm Port 2.0.2.1 (Windows XP)

Prolific USB-to-Serial Comm Port 3.8.43.0

Prolific USB-to-Serial Comm Port 3.2.0.0 (Windows Vista)

Notices

🕹️ Retro Games Online: gameyak.com

__________________________

After many requests we finally have put up a reddit page, please join us at r/oemdrivers

Poll: Which driver causes you the most trouble?

All other trademarks, logos and brand names shown on this website other than stated are the sole property of their respective companies and are not owned by oemdrivers.com. Information on the oemdrivers.com may not be duplicated without permission. oemdrivers.com is not responsible for any damages or losses that may arise from incorrect driver installation. Only install drivers if you are qualified to do so.