Prolific PL2303

Prolific PL2303 USB to RS-232 Bridge Controller

The PL-2303 operates as a bridge between one USB port and one standard RS232 Serial port. The two large on-chip buffers accommodate data flow from two different buses. The USB bulk-type data is adopted for maximum data transfer. Automatic handshake is supported at the Serial port. With these, a much higher baud rate can be achieved compared to the legacy UART controller.

Drivers:

Prolific PL2303 Driver (USB to Serial) Windows/macOS Download

Device ID(s)

USB\VID_067B&PID_2303

GlobalSat BU-353N5 USB GNSS Receiver Drivers

Deftun Card Reader Writer USB Swipe Encoder 3 Tracks MSR605X Drivers

GlobalSat BU-353N USB GPS Receiver Drivers

CHIRP Driver Download Windows 11/10/8/7

Ugreen USB to RS-232 Adapter Drivers (80111) (CM326)

Drivers for RS232 to USB Converter Download

GLINK (GA-009) USB TO SERIAL RS232 Drivers

GWC Technology AP1103 USB Serial Converter Drivers

Alfais AL4891 USB to RS232 Adapter Drivers

Alfais/Ancheyn AL4891 USB to RS232 Adapter Drivers

BaoFeng Programming USB Cable Driver Windows 11/10 x64

Sabrent USB 2.0 To Serial (9-PIN) DB-9 RS-232 Drivers

Sabrent CB-DB9P USB 2.0 To Serial (9-PIN) DB-9 RS-232 Drivers

UGREEN USB to RS232 Adapter Drivers

Add as a preferred source on Google

Would you use a community forum on our site?

All other trademarks, logos and brand names shown on this website other than stated are the sole property of their respective companies and are not owned by oemdrivers.com. Information on the oemdrivers.com may not be duplicated without permission. oemdrivers.com is not responsible for any damages or losses that may arise from incorrect driver installation. Only install drivers if you are qualified to do so.